User Manual

page 9
... print your plane | www.3DLabPrint.com
Step By Step PDF/VIDEO userguide
1. Choose airplane at www.3Dlabprint.com, our Facebook for live information...
Basic requirments (Me 109 T ):
min volume 195/195/150mm (250/120/150)
nozzle 0.4mm recommended (0.35 or 0.5mm alternatively)
Heated Bed recommended
PLA filament (or PETG, APLA, htPLA, PC-max....) not ABS
If you feel a little bit confused you can download wing test part from our websites or thingi-
verse, (the biggest part). Or contact [e-mail]
2. Create account, download
You will get download link for all files to your email (zipped)
or you can log in to your account and download directly from
our websites.
3. Gcodes preparing
options A Gcodes:
if your printer is i3 comptatible you can directly use prepared gcodes, simply save each to
SD card and let 3d printer do his job, HE temperature is set to 230 for best layer bonding,
you can edit speed and temperature on your printer LCD only. If Gcodes does not work
please proceed to the next options.