User Manual

page 5
... print your plane | www.3DLabPrint.com
Included:
1.STL 3d files
universal STL files designed for use with desktop FMD 3d printers and slicer software as
Simplify3D (recommend) CURA or MatterControl (this STLs are not compatible with Slic3r).
2.Factory files for Simplify3D slicer
with all our setting, this Factory files included all you need, note: we use PRUSA i3 ORIGINAL
printers so you may need adjust the basic printing parameters to match your printer or use it
as a start point for you, please give a look to Simplify3D
3.Step By Step PDF/VIDEO userguides
Apart from this userguide, please give a look to the Printing Guide with some Tips and Advices
for airplane printing (Thin Wall Printing)
4.Gcodes
Basic Gcodes prepared for direct use, so universal as is possible. Should work with i3 style
printers, you can try it out, but We can not guarantee that it will work with your printer.
100% works with PRUSA i3 ORIGINAL 3d printers...