User Manual

page 3
... print your plane | www.3DLabPrint.com
General specifications Me 109 T
Lenght: 771mm, 30.35in
Wingspan: 978mm, 38.5in
Height: 170mm, 6.7in
Wing area: 17.5 dm2
Wing loading: 51.0 g/dm2
Airfoil: aircombat modificated
Print weight: 410g(14.5oz)
Takeo weight (6s 1300 lipo): 821g(28.9oz)
Max takeo weight: 960g(33.8oz)
Never exceed speed, VNE: 205km/h
Design maneuvering speed, VA: 165km/h
Stall speed, VS: 33km/h
Powerplant
Propeller: aeronaut ELP 9/6 or APC 9/6 – 9/7.5
Motor: AX-4008Q/620KV, 22pole brushless HE electric motor
ESC: Castle Creations TALON 25
Battery: Turnigy nanotech 1300 mAh/6s/22.2V, 206g, 25C
Performance measurment
Max RPM and Amps (static): 12 000/min with APC 9/6, current 19A
11 550/min with APC 9/7.5, current 21A
Max RPM and Amps (level flight): 13 700/min with APC 9/6, current 12A
12 400/min with APC 9/7.5, current 13.5A
Max speed VH (level flight): 135 km/h – 67.5kn – 78 mph with APC 9/6
150 km/h – 73kn – 84 mph with APC 9/7.5
Rate of climb: 29 m/s (5 373 ft/min) with APC 9/6
32 m/s (5 728 ft/min) with APC 9/7.5
Flight time (6s 1300mAh/full): 7:40 with APC 9/6
5:30 with APC 9/7.5
7:40 with aeronaut ELP 9/6