User Manual
page 2
... print your plane | www.3DLabPrint.com
3D Lab Print Messerschmitt Bf 109 T – fully printable
R/C plane for your home 3Dprinter
Future of flying - Print your own plane
We still trying move things further, so this project is again full of other improvements for
better durability , easier assembly , better geometry solution and so on..., we hope you
enjoy it, although this print may test your competencies to and quality of your printer (wel-
come to the thin wall printing)
The first fully printable airplanes with suitable files prepared for your 3Dprinter.
Flight charecteristics are comparable or even better than classic build model airplane.
Simply download and then print it anytime you need only for $10 (filament cost).
This is not a dream, now you can print this HI-TECH …. at home, print spar parts, and so on...
Extensive hi-tech 3d structural reinforcement which makes the
model very rigid while still maintaining lightweight airframe and exact airfoil even when it
is made only from plastic. This perfect and exact 3d structure is possible only due to aditive
3dprinting technology. So welcome to the 21th century of model flying. Be The first at your
airfield.
Easy to assembly, you do not need any extra tool or hardware, you only need to
glue printed parts together and make pushrods for control. The rest of the assembly is very
easy.Simply add brushless motor, ESC, servos and radio system. Don´t worry, detailed step
by step PDF/VIDEO is included.
You will get superb performance airplane with High ecient powerplant which let you fly
7+ minutes at full throtle with the speed exceeding 150 kph (HP setup). On the other hand
low stall speed is achived for easy landing.