User Manual

page 11
... print your plane | www.3DLabPrint.com
options D CURA or MatterControl
MatterControl and CURA are free :-) and also gives very good results and airframe is still
strong enough, slicer setting is very easy.
Please try find right extrusion multiplier and temperature for good weight and bets layer
bonding, give a look to parts weight list for proper multiplier setting.
You can also use our predefined CURA or MC slicer setting file included in package (always
adapt it for your printer, change build volume, filament diameter and so on... depends on
your printer!!!):
CURA_wing_fuse.ini (wing and fuselage and so on... parts)
CURA_ailer_elev.ini (only ailerons, elevator and rudder parts)
CURA_thick.ini (motor mount, battery holder, spinner)
OR
MC_wing_fuse.slice (wing and fuselage and so on... parts)
MC_ailer_elev.slice (only ailerons, elevator and rudder parts)
MC_thick.slice (motor mount, battery holder, spinner)
AND... please give a look to VideoGuides:
video CURA slicer setting
video CMatterControl slicer setting