User Manual
page 42
... print your plane | www.3DLabPrint.com
6.2 Landing gear (fixed)
You can aslo use just fixed landing gear and safe some receiver channels, but of course
flight characteristic will suer from aerodynamic drag (will be not so smooth and stable)
You will need: Light Foam Main Wheel or any similar 85-90mm
Nose wheel or any similar 45-60mm
Landing Gear Wheel Stop Set Collar 9x5.1mm or similar
5 mm wire/rod for LG leg
18x 3.5-4/30mm self-tapping screw
Dremell or any steel handsaw
Table Vice and Hammer, Yeah!
Torch or lighter