User Manual

page 3
... print your plane | www.3DLabPrint.com
General specifications:
Wingspan: 1720 mm / 68 inch
Length: 1360 mm / 53,6 inch
Height: 400 mm / 15,7 inch
Wing area: 43 dm2 / 4.7 sq ft
Wing loading: 83.2 g/dm2 / 27.3 oz at sq ft
Center of gravity: 83mm / 3.27 in from LE
Airfoil: 3DLabPrint semi 04
Weight of printed parts (w/o wheels): 1980 g / 72.7 oz
Takeo weight (4s 5000mAh Li-Pol): 3600 g / 160.5 oz
Max takeo weight: 4200 g / 194 oz
Never exceed speed, Vne: 120 km/h / 93 mph
Design max maneuvering speed, Va: 75 km/h / 46 mph
Stall speed Vs: 32 km/h / 17mph
Performance measurement:
Max speed VH (level flight): 110 km/h – 75.6kn – 87.0mph
Rate of climb: 21 m/s (6 500 ft/min)
Flight time (4s 5000mAh): 7:00 min (+20% reserve)