User Manual

page 14
... print your plane | www.3DLabPrint.com
4. Assembling printed parts
4.1 Wing assembly (including Engine Gondola)
See video guide #4.1
wing L 1
95g/3.35oz
aileron L
20g/0.7oz
cowling
36g/1.27oz
wing L 3
56g/2oz
wing L 5
24g/0.85oz
wing L 6
12g/0.42oz
you will need: CA Glue - medium or similar medium viscosity CA glue
Activator for CA Glue or similar, (gas presurized works better)
Soldering Iron or any hot tool to cut holes
1.75-2mm rod/axle for flap hinge (we use fillament or toothpick)
sound as a option (ESS-AIR Engine Sound System) + cable extension
Proceed the way shown in videoguide:
See video guide #4.1
flap2 L
19g/0.67oz
flap1 L
22g/0.78oz
wing L 2
82g/2.9oz
wing L 4
42g/1.48oz
motor mount
11g/0.39oz
eng. gondola1
68g/2.4oz
eng. gondola2
62g/2.19oz
eng. gondola4
39g/1.38oz
eng. gondola3
9g/0.32oz
The weight of parts can vary +/- 8% due to di PLA color or brand...!!!