User Manual

page 12
... print your plane | www.3DLabPrint.com
3. Print it
Save generated Gcodes and insert SD card to your printer, prepare your printer and start
printing. We prefer to use SD rather than a direct connection via USB
Note: ABS filament is not suitable for this. Scaling the model will lead to unusable result!
Note: ninja flex or simmilar fillaments can stick very hard to PEI based surfaces be careful...
You will need: PLA filament - good quality (we need good layer bonding)
Strong hair spray (or your favorite adhesive bed surface)
(disregard with PEI or similar bed surface, Mk2/3...)
Razor blade
AND... please watch the VideoGuides:
video printing guide #3
North American B-25J Mitchell - parts diagram: