User Manual

page 16
... print your plane | www.3DLabPrint.com
5.2.1 Fuselage assembly Albatros D.Va
Assemble all the fuselage parts F1-F5 using thin CA glue. The new 3DLabPrint lock system
will help you. Pay attention to align all the parts properly before applying the glue, especially
the part F4, so the stabilizers are perpendicular to the wing.
Insert a ball pen spring for a cover latch (the engine replica) before glueing the fuselage cover
parts. Add all the optional scale accessories, such as Spandau machine guns, seat, headrest,
exhaust, intake and a pilot...
See video guide #5
you will need: CA Glue thin viscosity + activator (or medium CA glue)
needle applicator (needed for thin CA glue)
Snap knife, Some cloth for wiping CA glue...
1x ball pen spring
F1
36g/1.26oz LW
F2
44g/1.55oz LW
F3
23g/0.81oz LW
F4
20g/0.70oz LW
F5
5g/0.17oz LW
ball pen spring
spinner plate
4,5g/0.16oz PLA
spinner top
4,5g/0.16oz PLA
fuselage cover 1
8g/0.28oz LW
engine cover arm
32g/1.12oz PLA
Spandau guns (pair)
14,5g/0.51oz PLA
fuselage cover 2
10g/0.35oz LW
seat
8g/0.28oz LW
headrest
3g/0.10oz LW
pilot
9g/0.35oz LW