User Manual

ManualsBrands3D LabPrint ManualsAircraftsAlbatros DVA (LW- PLA PETG)

page 13

... print your plane | www.3DLabPrint.com

Albatros D.Va

weights of printed parts

Albatros D.Va is another member of LW Planes

series designed for easy and cheap ﬂying. The build

is simple even for a beginner. Its very low weight,

easy assembly and fantastic ﬂight characteristics

makes this model an ideal plane for beginner RC

pilots.

Very suitable for dads and kids. Children will learn

some modern building skills and technology and

most of all have fun. This is the reason, why every

dad should have a 3D printer at home.

This model has been completely designed with a

new LW PLA material by ColorFabb in mind.

Parts printed from this LW PLA are light, easily

sanded and glued together. This model requires

only about 400 g of this material, that means it’s a

very cheap build. In case of accident, parts can be

easily reprinted for just a ﬁlament cost.

The LW material is using an active foaming

technology to achieve lightweight, low-density

PLA parts. At around 230°C this material starts

foaming, increasing its volume by nearly 3 times.

All parts of this plane should be printed from LW-

PLA as written in table.

Enjoy the fun together!

material: LW PLA PLA

F1 36 g

F2 44 g

F3 23 g

F4 20 g

F5 5 g

fuselage cover 1 8 g

fuselage cover 2 10 g

fuselage cover motor arm 32 g

fuselage struts (pair) 12 g

fuselage struts pins 5 g

wing upper L1 22 g

wing upper L2 21 g

wing upper L3 17 g

wing upper L4 0,5 g

wing upper R1 22 g

wing upper R2 21 g

wing upper R3 17 g

wing upper R4 0,5 g

wing bottom 1 10 g

wing bottom L2 11 g

wing bottom L3 16 g

wing bottom L4 16 g

wing bottom R2 11 g

wing bottom R3 16 g

wing bottom R4 16 g

aileron L1 1,6 g

aileron L2 1,6 g

aileron L3 3 g

aileron L4 4,5 g

aileron R1 1,6 g

aileron R2 1,6 g

aileron R3 3 g

aileron R4 4,5 g

wing struts (pair) 11 g

wing struts pins 3 g

stabiliser L1 7,5 g

stabiliser L2 3 g

stabiliser R1 7,5 g

stabiliser R2 3 g

elevator L1 1,5 g

elevator L2 3 g

elevator L3 1 g

elevator R1 1,5 g

elevator R2 3 g

elevator L3 1 g

rudder 1 2 g

rudder 2 3 g

rudder 3 3 g

gear parts (axle) 3,3 g

gear junction (pair) 6 g

gear axle cover 6 g

gear disc (pair) 24 g

gear tyre (pair) FLEX 34 g

tail skid 3,5 g

motor mount 9,5 g

spinner plate 4,5 g

spinner top 4,5 g

engine exhaust 18 g

seat 8 g

Spandau guns (pair) 14,5 g

water cooler 0,5 g

printed weight 579 g