User's Manual

User Manual
FireCR Flash TM-401-EN
15
Chapter 3. Setting Up
3.1. Tabletop Mount
The reader must be placed on a rigid and flat desk or tabletop with at least 10 cm (4 inch) free
space on both sides, 20 cm (8 inch) on rear side and 50 cm (20 inch) on front side for cassette
insertion. Its space requirements are shown below.
In case that desk or table is not flat, adjust feet under the reader for leveling. The reader
weighs approximately 21.5 kg (47 lbs) and requires two persons to lift. Carefully place the
reader into its final position.
WARNING
Unsuitable Installation Sites
Locations with excessive humidity or dust
Locations subject to high temperature
Locations subject to shaking or vibration
Locations exposed to considerable electrical or magnetic
noise, or other forms of electromagnetic energy
Locations with poor heat radiation
Free space of 20 cm (8
inch) on backside, at
least, to allow the power
switch, power cord and
USB cord to be reached
by hand at all times.
Free space of 50 cm (20
inch) on front side, at
least, for cassette insertion
and ejection.
Front Side Backside