User's Manual

User Manual
FireCR TM-701
29
4.3.5. Circuit Functions
Figure 11. Circuit diagram
 Base Board:
Base board is a controller of peripherals. It controls peripherals upon command of
core board.
 Peripheral:
This is peripherals for image acquisition. It consists of “Eraser” which erases residual
images in imaging plate, “Step Motor and Photo Interrupters” which moves stage,
“Laser, Mirror and DC Motor” which are required to radiate laser onto imaging plate,
“Edge Switch and DC Motor” which assures proper insertion of the cassette, and
“Indicator” which displays the status of the system.
 Base Board Image Data Controller (Core Board):
This parts controls peripherals for image acquisition. And it delivers amplified digitized
signal to PC via USB.
 Image Sensor (PMT):
This Photomultiplier Tube receives the signal through scanning of imaging plate, and it
sends signal to analog readout circuit.
 Power Adapter:
It supplies power to all modules of the system which are required for operation.