User's Manual

User Manual
FireCR TM-701
28
4.3. Operating Instructions
4.3.1. Turn on the Scanner
Turn on the scanner. Power switch is on the rear side of the scanner.
4.3.2. Turn on the Computer
Turn on the computer. Acquisition and Diagnostic Software must be installed before operate
the scanner.
4.3.3. Cassette Insert and Eject
Insert the cassette to the entrance of the scanner and push gently until it reaches to the
protection wall inside of the scanner. Green indication LED is on when the cassette is inserted
correctly. Insertion direction of the cassette must be parallel to the scanner.
Cassette can be ejected when scanning and erasing are completed. Gently pull back the
cassette and ejection direction of the cassette must be parallel to the scanner.
4.3.4. Getting a Scanned Image
To getting a scanned image, refer to Acquisition and Diagnostic Software manual.
DANGER
This device uses laser. Avoid looking inside of the scanner.
WARNING
Do not insert the cassette in wrong direction or upside down when
it is being inserted. Cassette insertion direction is marked on the
cassette.