User's Manual

User Manual
FireCR
Chapter 3. Setting Up
Locations with poor heat radiation
Locations subject to shaking or vibration
Locations exposed to considerable electrical or magnetic
noise, or other forms of electromagnetic energy
Locations with excessive humidity or dust
Locations subject to high or temperature
WARNING
Unsuitable Installation Sites
3.1. Tabletop Mount
The scanner must be placed on a rigid and flat desk or tabletop with at least 10cm (4 inch) free
space on both sides, 20cm (8 inch) on rear side and 50cm (20 inch) on front side for cassette
insertion. Its space requirements are shown below.
Free space of 20cm (8
inch) on backside, at
least, to allow the power
switch, power cord and
USB cord to be reached
by hand at all times.
Free space of 50cm (20
inch) on front side, at
least, for cassette insertion
and ejection.
Front Side Backside
FIGURE 1. Space Requirements (Top View)
16