User Guide

1-5
Item Data
Max power consumption (full load) 50 W
Operating temperature 0°C to 45°C (32°F to 113°F)
Relative humidity
(noncondensing)
10% to 90%
Either a gigabit SFP Ethernet optical interface or its corresponding 10/100/1000 BASE-T auto-sensing
Ethernet electrical interface can be used at a time.
SFP Modules
A WX5002 AC provides two gigabit SFP Ethernet optical interfaces. You can choose the following SFP
modules:
z 1000 BASE-SX SFP module
z 1000 BASE-LX SFP module
The following table describes the Ethernet optical interface attributes.
Table 1-4 Ethernet optical interface attributes
Description
Attribute
Multimode
short-haul
(850 nm)
Single-mode
medium-haul
(1310 nm)
Single-mode
long-haul
(1310 nm)
Single-mode
long-haul
(1550 nm)
Single-mode
ultra-long
haul (1550
nm)
Connector SFP/LC
Optical fiber
62.5
μm/125 μm
multimode
9 μm /125 μm
single-mode
9 μm /125 μm
single-mode
9 μm /125 μm
single-mode
9 μm /125 μm
single-mode
Max. transmission
distance
0.55 km
(0.34 mi)
10 km (6.21
mi)
40 km (24.86
mi)
40 km (24.86
mi)
70 km (43.50
mi)
Central wavelength 850 nm 1310 nm 1310 nm 1550 nm 1550 nm
Min. -9.5 dBm -9 dBm -2 dBm -4 dBm -4 dBm Optical
transmit
power
Max. 0 dBm -3 dBm 5 dBm 1 dBm 2 dBm
Receiving
sensitivity
-17 dBm -20 dBm -23 dBm -21 dBm -22 dBm
Operating mode
1000 Mbps
Full duplex