User's Guide
Table Of Contents
Disk Factory
7
2
Put the
End User Utilities CD
in the CD-ROM drive. The SETUP program should
start automatically. If it does not start, you can run it manually by selecting
Run
from the Start menu.
3
Select
Create Diskettes
.
4
In the Disk Factory window, click
Next
.
5
Select the software you want to transfer to diskette. If you select
All
, you will need
four floppy diskettes.
6
Select the action, for example,
Create and Verify Disks
, and click
Next
.
7
When you are ready to install the application software from diskette, put
Wireless
LAN Application Disk 1
in the floppy drive and run SETUP
.
If you are installing the drivers manually, use the Drivers diskette when the setup
wizard for your operating system prompts for drivers supplied by the
manufacturer.
Exhibit 8: User's Manual