User manual
Table Of Contents
- OfficeConnect® Ethernet Hub 16C
- 3Com Corporation n 5400 Bayfront Plaza n Santa Clara, California n 95052-8145
- Before You Start
- Workstation Connections
- 1 10BASE-T connections for all your equipment. 3Com produce a range of easy to install network ad...
- 2 An operating system (for example, Netware or Windows 95/98) with network support configured, ru...
- 3 One ‘Straight-through’ 10BASE-T cable for every workstation or piece of equipment. A ‘Straight-...
- Hub Connections
- Workstation Connections
- Stacking the Units together
- The Rubber Feet
- The Stacking Clip
- 1 Place your unit on a flat surface.
- 2 Fit the clip across the top of the unit, as shown in Figure 2 (picture 1), ensuring that the lo...
- 3 Align the fastening pieces over the slots found on each side of the unit.
- 4 Push the clip down gently to secure it, ensuring the fastening pieces snap into the slots on th...
- 1 Rest the second unit on top of the clip and align it with the front of the unit below.
- 2 Press down gently on the unit to secure it onto the clip, ensuring the fastening pieces fit int...
- Figure 2 Stacking Your Units Together
- Positioning Your OfficeConnect Hub
- Securing the OfficeConnect Hub
- Connecting Workstations and Other Equipment to Your Hub
- Connecting OfficeConnect Hubs Together
- Dimensions and Operating Conditions
- Standards
- Online Technical Services
- 3Com Knowledgebase Web Services
- Support from Your Network Supplier
- Support from 3Com
- Returning Products forRepair
- Hardware
- Software
- Year 2000 Warranty
- Obtaining Warranty Service
- Warranties Exclusive
- Limitation of Liability
- Disclaimer
- Governing Law
- FCC Statement
- CSA Statement
- VCCI Statement
- BCIQ Statement
- Information To The User
18
E
NVIRONMENTAL
S
TATEMENTS
It is the policy of 3Com Corporation to be
environmentally-friendly in all operations. To uphold our
policy, we are committed to:
■
Establishing environmental performance standards that
comply with national legislation and regulations.
■
Conserving energy, materials and natural resources in all
operations.
■
Reducing the waste generated by all operations.
■
Ensuring that all waste conforms to recognized
environmental standards.
■
Maximizing the recyclable and reusable content of all
products.
■
Ensuring that all products can be recycled, reused and
disposed of safely.
■
Ensuring that all products are labelled according to
recognized environmental standards.
■
Improving our environmental record on a continual basis.
End Of Life Statement
3Com processes allow for the recovery, reclamation and safe
disposal of all end-of-life electronic components.
Regulated Materials Statement
3Com products do not contain any hazardous or
ozone-depleting material.
Environmental Statement about the Documentation
The documentation for this product is printed on paper that
comes from sustainable, managed forests; it is fully
biodegradable and recyclable, and is completely
chlorine-free. The varnish is environmentally-friendly, and the
inks are vegetable-based with a low heavy-metal content.
Environmental Statement about the Product
Packaging
The packaging for this product is fully recyclable. It has a
recycled (post consumer) waste content of at least 40% by
weight, and no heavy-metal content.
3C16702.book Page 18 Tuesday, July 13, 1999 10:16 AM