Powerware Uninterruptible Power System Installation and Operator's Manual

Communication
63
Powerware
®
PrestigeSeriesInstallation andOperator’s ManualforIBMApplications (3000 VA)Uncontrolled Copy
Z > Set Baud Rate allows you to select a new baud rate. The Select
Baud Rate Menu displays a list of baud rate options.
5. To save the configuration settings, type S at the Main Menu
prompt. The UPS operates and communicates under the new
configuration, and defaults to these settings each time it is
started.
If you want to abandonthe selections you have made,type
Q to
quit.
NOTE Anychangesyoumake tothe UPScommunicationsconfigurationmust
correspond tothe communications equipment youare using.Inparticular, newbaud
rate selectionsfor the UPS must match your communicationsequipment.
Power Management Software
Power management software allows youto monitor UPS operations
automatically. To use OnliNet or LanSafe software, the UPS must be
configured for any one of the Data Dump, Terminal, or Printer modes;
however, Printer mode is preferred.
OnliNet provides multiple levels of UPS monitoring and control, as well
as automatic shutdownfor many different operating systems. If you
have any questions or would like further information, see Chapter 8,
“AS/400 Service” on page 75 for the number to call in your location.