Powerware Uninterruptible Power System Installation and Operator's Manual

Communication
61
Powerware
®
PrestigeSeriesInstallation andOperator’s ManualforIBMApplications (3000 VA)Uncontrolled Copy
NOTE Catalog #,Serial #,and Version# areallidentificationnumbersunique toyour
UPSand canalsobe foundon the UPSnameplate.
1 > Continuous Dump The UPS regularly transmits status
information to the computer. Baud rates of 1200 to 2400 are
recommended to reduce host computer overhead when using
this mode.
2 > Polled Dump Status information is transmitted only when
requested by a poll character (Control-E).
3 > Smart Dump Status information is transmitted when polled, as
in the previous mode. However, the transmission also occurs
automatically whenever UPS status changes. For example, if
there is a power outage, UPS status information changes and is
therefore, automatically transmitted.
A > ASCII Terminal TheUPSdisplaystheformatteddataonthe
attached video terminal.
B > VT100 Terminal TheUPSdisplaystheformatteddataonthe
attached video terminal.
P > Printer Dump The UPS prints the formatted data on the
attached printer.
L > LAN Configuration allows you to configure the UPS for a new
LAN mode and displays the Select LAN Configuration Menu.