User guide

Examples 81
Examples The following section provides some examples of how to administer the
devices on your network.
Renaming a Switch
4007 using Telnet
You have a Switch 4007 on your network and you wish to rename it
using the Telnet Management Interface. To do this:
1 Find the Switch 4007 device in the 3Com Network Administrator device
list. This can be done using Edit > Find if needed.
2 Select the device and right-click on it to launch the right-click menu.
3 Select the Telnet Management menu item. The Telnet console will be
launched.
4 Enter your username and password for the device.
5 Type set name < new name >.
6 Type logout. The Telnet console will close.
7 Use Refresh to update the current inventory file with the new name.
Disabling a Port on a
Switch 4400 using the
Web Interface
You have a Switch 4400 on your network and you wish to disable a port
on it using the web interface:
1 Find the appropriate Switch 4400 device in the 3Com Network
Administrator device list. This can be done using the Find dialog if
needed.
2 Select the device and right-click on it to launch the right-click menu.
3 Select the Web Management menu item. The default web browser will
be launched.
4 Enter your username and password for the device.
5 Select the Device View tab in the web browser.
6 Right-click on the port and select Setup.
7 Change the Port State to Disabled and click OK.
8 Close the web browser.
3Com Network Administrator for HP OpenView.book Page 81 Wednesday, November 12, 2003 2:33 PM