User guide

76 CHAPTER 4: DEVICE ADMINISTRATION
Device Selection Step
The Device Selection step lists the 3Com devices on your network that
have not yet been registered as shown in Figure 36
.
Figure 36 Device Selection Step
Each row in the list corresponds to a 3Com product. If the device in the
inventory file is a stack, the list will contain one row per unit. If the
network node in the inventory is a chassis device, the list will contain one
row for each chassis blade.
The Device Selection step contains the following columns:
■ Register Now — when the check box in this column is selected, the
corresponding device will be registered for warranty. De-select the
check box if you do not want this device to be registered
■ Device Name — the name of the device as it appears in the inventory
file. If the row corresponds to a unit (for a stack) or a blade (for a
chassis), the index of the unit or blade will also be specified. For
instance, MySwitch (Unit 2).
■ Device Type — the type of the product.
By default, all supported 3Com devices are listed and selected.
3Com Network Administrator for HP OpenView.book Page 76 Wednesday, November 12, 2003 2:33 PM