User guide

22 CHAPTER 1: GETTING STARTED
Figure 5 Select Subnets Dialog
3 Select the subnets you want to import 3Com devices from and click OK.
An Import Progress dialog is displayed while 3Com Network
Administrator contacts the HP OpenView database and retrieves device
information for the 3Com devices in the subnets you have specified.
Once the import has taken place, the Refresh Progress dialog is displayed.
During importing, 3Com Network Administrator (using SNMP) retrieves
even more detailed information about your 3Com devices than is held in
HP OpenView. When the refresh operation is complete, a Summary
dialog is displayed as shown in Figure 6
. From the Summary dialog you
can view reports on the import and refresh operations.
3Com Network Administrator for HP OpenView.book Page 22 Wednesday, November 12, 2003 2:33 PM