User guide

202 CHAPTER 9: REPORTING
Once columns are included in a report, you can change the order the
columns appear in by selecting an entry in the included columns and
clicking Move Up or Move Down to change their position in the table.
The first entry in the list appears in the first column of the table and so
on.
The first column is used to sort the entire report so if you wish to sort the
report by device name, for example, then ensure the Device Name
column is first in the report.
Tab l e 23
shows the available columns:
Table 23 Available Columns
Column Description
Agent Version The software agent version running on a device e.g.
3.0.0. If the agent version is not available then N/A is
displayed in this column.
Device Name The name of the device, which is one of the following:
custom name, DNS name, SNMP sysName, IP address,
MAC address.
IP Address The IP address of the device, or Unknown if it is not
known.
MAC Address The MAC address or addresses associated with a device.
Number of Units The number of units a device consists of, i.e. the number
of cards in a modular system or the number of units in a
stack.
Ports Available The number of ports on a device.
Registered Whether the device has been registered with 3Com using
the Device Warranty feature.
Subnet The subnet the device is on, e.g. 104.204.1.0
(255.255.255.0)
sysDescr The value of SNMP object sysDescr for the device.
sysName The value of SNMP object sysName for the device.
sysOid The value of SNMP object sysOid for the device.
Total Ports The total number of ports on a device.
Type The type of the device e.g. ‘3Com Switch 3300’
Used Ports The number of used ports on a device.
3Com Network Administrator for HP OpenView.book Page 202 Wednesday, November 12, 2003 2:33 PM