User guide

194 CHAPTER 9: REPORTING
This report is launched from the Reports dialog and is selection-sensitive.
If you have a number of devices in a stack (e.g. a Switch 3300 and 1100),
all unit types are listed in the Type column. Similarly, if a modular device
(e.g. the Switch 4007), has several blades in it, each blade type is listed in
this column. For convenience, it also displays the number of devices at
the start of the report.
Capacity Report The capacity report allows you to gauge how many available ports you
have on your network. It lists the following details for each device:
■ IP address
■ Device type
■ Total ports on the device
■ Ports available (unused) on the device
This report provides information on all devices for which 3Com Network
Administrator has port information.
At the bottom of the Ports available column is a summary listing the
number of free ports across the device selection and a percentage of how
many ports are available of the total ports present.
This report is launched from the Reports dialog and is selection-sensitive.
Changes Report This report is created during Refresh and gives information on device
property changes, devices being added or removed from the network.
The Changes report will not produce information on IP address changes
to avoid large reports being generated on networks using DHCP.
3Com Network Administrator for HP OpenView.book Page 194 Wednesday, November 12, 2003 2:33 PM