User guide

176 CHAPTER 8: PRIORITIZING NETWORK TRAFFIC
6 To specify the application definition, type the name of the application in
the Name field.
7 To add each of the classifiers to the application, click Add to display the
Add Classifier dialog as shown in Figure 84
.
Figure 84 Add Classifier - Prioritizing a Video Conferencing Application
Example
8 Select the appropriate type and enter the appropriate value (in this case,
UDP and 2001 respectively). Click OK to return to the Setup Application
step.
9 Repeat steps 7 and 8 to add in the remaining classifiers (in this case, UDP
port 2002 and UDP port 2003).
10 Click OK again to return to the Applications dialog where the video
conferencing application is now listed in the Normal list.
11 Select the video conferencing application from the Normal list. Select Set
Prioritized.
12 Click Next to display the next step of the wizard. If the Resource Warning
dialog is displayed then you may wish to resolve the resource warning
before proceeding. Refer to “
Resource Warnings” on page 184 for more
information.
13 When you reach the Configuration Summary step, click Finish to apply
the updated configuration to the supported 3Com devices in the
inventory file.
3Com Network Administrator for HP OpenView.book Page 176 Wednesday, November 12, 2003 2:33 PM