User guide

Examples 173
Figure 81 Add Server - Prioritizing Traffic To and From a SAP Server Example
5 Type the name of the SAP server (or the function that it performs) into the
Name: field and type either the DNS name or the IP address of the server
into the DNS name/IP address: field. Select OK to add the server and
return to the Setup Servers step.
If you have entered a DNS name then 3Com Network Administrator will
resolve the DNS name to an IP address for you.
6 Select OK in the Setup Servers step to return to the Servers step where
the SAP server is now listed in the Normal list.
7 Select the SAP server from the Normal list and select Set Prioritized then
select Next to display the Applications step.
8 Select Next to show the next step of the wizard. If the Resource Warning
dialog is displayed you may wish to resolve the resource warnings before
proceeding. Refer to “
Resource Warnings” on page 184 for more
information.
9 When you reach the Configuration Summary step, select Finish to apply
the updated configuration to the supported 3Com devices in the
inventory file.
Blocking Access to a
Streaming Audio
Server
You have noticed that a significant amount of traffic is going to and from
a server that provides streams for internet radio stations. This traffic is
having an adverse effect upon other traffic and you wish to temporarily
prevent access to the streaming audio server.
1 In the Introduction step, click Next. The wizard will analyze your network
and display the Configuration Type step as shown in Figure 77
2 Select the Network-wide configuration radio button and click Next to
show the Servers step shown in Figure 79
.
3Com Network Administrator for HP OpenView.book Page 173 Wednesday, November 12, 2003 2:33 PM