User guide

Examples 169
Examples The following section details useful examples of traffic prioritization
configuration.
Applying an Existing
Configuration to New
Devices
You have just upgraded the core of your network to an XRN core and
wish to configure the XRN devices to participate in the end-to-end
prioritization configuration that you have previously applied to your
network. To do this:
1 Ensure that the new devices are present in the inventory file by importing
an updated list of devices from HP OpenView, if necessary.
2 In the Introduction step, select Next. The wizard will analyze the devices
in the inventory file and display the Configuration Type step as shown in
Figure 76
.
Figure 76 Configuration Type - Applying an Existing Configuration to New
Devices Example
3 Click the Device type configuration radio button and select 3Com XRN
Fabric from the drop-down list.
4 Click Next to show the Servers step in the wizard and continue selecting
Next until the Configuration Summary step is shown.
5 Click Finish to apply the previously applied configuration to your XRN
core.
3Com Network Administrator for HP OpenView.book Page 169 Wednesday, November 12, 2003 2:33 PM