User guide

Examples 125
5 Select Next to display the Scheduling step, then select the Later radio
button to schedule the Device Setup operation to begin after you leave in
the evening. Enter the time using the 12 hour clock (bearing in mind the
setting for a.m./p.m.) and leave today as the selected day to run the
operation as shown in Figure 60
:
If you decide to schedule the backup operation for a time after midnight,
remember to set the date to the following day.
Figure 60 Scheduling Example
6 Select Next to display the Summary step and select Finish to schedule the
Device Backup to start later in the evening. When the Device Backup
operation runs, it will attempt to backup the software configuration of all
the supported devices that are in the inventory file.
Restoring to a
Replacement Device
There has been a hardware failure on one of the core devices in your
network. The failed device is one that you have earlier backed up as part
of your disaster recovery plan. You have a replacement device with the
same physical configuration as the failed device and you want to
configure the replacement device and substitute it for the failed device.
3Com Network Administrator for HP OpenView.book Page 125 Wednesday, November 12, 2003 2:33 PM