User Guide Hub/Switch SuperStack II Switch 1000
Table Of Contents
- About This Guide
- Getting Started
- Installation and Setup
- Setting Up for Management
- Managing The Switch 1000
- Setting Up Users
- Creating a New User
- Deleting a User
- Editing User Details
- Assigning Local Security
- Choosing a Switch Management Level
- Setting Up the Switch Unit
- Setting Up the Switch Ports
- Setting Up the Switch Database (SDB)
- Setting Up Resilient Links
- Setting Up Traps
- Setting Up the Console Port
- Resetting the Switch
- Initializing the Switch
- Upgrading Software
- Advanced Management
- Status Monitoring and Statistics
- Safety Information
- Screen Access Rights
- Trouble-shooting
- Pin-outs
- Switch 1000 Technical Specifications
- Technical Support
- Glossary
- Index
- 3Com Corporation Limited Warranty
- Electro-Magnetic Compatibility
Managing Over The Network 3-3
If your network is internal to your organization
only, you may use any arbitrary IP address. We sug-
gest you use addresses in the series 191.100.X.Y,
where X and Y are numbers between 1 and 254.
Use 191.101.X.Y for the SLIP address.
If your network has a connection to the external IP
network, you will need to apply for a registered IP
address. This system ensures that every IP address
used is unique; if you do not have a registered IP
address, you may be using an identical address to
someone else and your network will not operate
correctly.
Obtaining a Registered IP Address
InterNIC Registration Services is the organization
responsible for supplying registered IP addresses.
The following contact information is correct at the
time of publication:
Network Solutions
Attn: InterNIC Registration Service
505, Huntmar Park Drive
Herndon
VA 20170
U.S.A.
Telephone: (1) (703) 742 4777
If you have access to the Internet, you can find fur-
ther information about InterNIC by entering the fol-
lowing URL into your web browser:
http://www.internic.net