Switch User Manual
Manuals
Brands
3Com Manuals
Switch
4510G
41
42
43
44
45
46
47
48
49
50
Table Of Contents
00-Cover.pdf
Command conventions
GUI conventions
Symbols
01-text.pdf
1 Product Overview
Overview
Introduction to Switch 4510G
Switch 4510G 24-Port
Front Panel
Rear Panel
Switch 4510G 48-Port
Front Panel
Rear Panel
Ports
Console Port
10/100/1000Base-T Ethernet Port
SFP Port
Combo Port
LEDs
System Status LED
RPS Status LED
Port Mode LED
Seven-Segment LED
10/100/1000Base-T Auto-Sensing Ethernet Port Status LED
SFP Port Status LED
Interface Module Status LED
Optional Interface Modules
Short-haul Dual-Port 10 GE CX4 Interface Module
Dual-Port 10 GE XFP Interface Module
One-port 10 GE XFP Interface Module
Dual-Port 10 GE SFP+ Interface Module
Description of LEDs of Interface Modules
2 Preparing for Installation
Safety Precautions
Installation Site
Temperature/Humidity
Cleanness
Electromagnetic Susceptibility
Laser Safety
Installation Tools
3 Installing the Switch
Installation Flow of the Switch
Installing the Switch into a 19-Inch Rack Using Mounting Brackets
Introduction to Mounting Bracket
Use Front Mounting Brackets to Install a Switch
Use Front Mounting Brackets and a Tray to Install a Switch
Mounting the Switch on a Workbench
Connecting the Grounding Cable
When a Grounding Strip is Available
Where a Grounding Conductor Can be Buried
In Other Installation Sites
Connecting the Power Cords
Connecting the AC Power Cord
Connecting the RPS Power Cord
Installing an Interface Module
Installing an Interface Card
Removing an Interface Module
Installing Dedicated CX4/SFP+ Cable
Installing Dedicated CX4/SFP+ Cable
Removing Dedicated CX4/SFP+ Cable
Installing Switches for an IRF
Installation Flow for an IRF
Drawing a Plan for an IRF with Switches
Determine the number of IRF members and the bandwidth
Select the proper interface modules and cables
Configure the physical connection mode
Connect the cables
Verifying the Installation
4 Starting and Configuring the Switch
Setting up the Configuration Environment
Connecting the Console Cable
Console Cable
Connection Procedure
Setting Terminal Parameters
Booting the Switch
Checking before Powering on the Switch
Powering on the Switch
Changing the Startup Mode
5 Boot ROM and Host Software Loading
Introduction to Loading Modes
Loading Software Through the Boot ROM Menu
Boot Menu
Loading Software Using XMODEM Through Console Port
Introduction to XMODEM
Loading Boot ROM software
Loading host software
Loading Software Using TFTP through Ethernet Port
Introduction to TFTP
Loading Boot ROM software
Loading host software
Loading Software Using FTP Through Ethernet Port
Introduction to FTP
Loading Boot ROM software
Loading host software
Loading Software Through CLI
Loading Software Using FTP
Loading Software Using TFTP
6 Maintenance and Troubleshooting
Software Loading Failure
Password Missing Failure
Missing User Password
Missing Boot ROM Password
Power Supply Failure
AC input
RPS input
RPS&AC input
Fan Failure
Configuration System Failure
Troubleshooting when there is no terminal display
Troubleshooting when the terminal display is illegible
4-10
Y
ou can configure the switch now
.
The
Switch 4510G
provide abundant command views. For detail
ed descriptions about the configuration
commands and CLI, refer to
3Com Switch 4510G Family Configuration Guide
,
3Com Switch 4510G
Family Command Refere
nce Guide.
1
...
...
47
48
49
50
51
...
...
66
