Owner's Manual

4
RUNNING THE SETUP WIZARD
Accessing the
Wizard
The Gateway setup program is Web-based, which means that it is
accessed through your Web browser (Netscape Navigator or Internet
Explorer).
To use the Setup Wizard:
1 Ensure that you have at least one computer connected to the Gateway.
Refer to Chapter 2
for details on how to do this.
2 Launch your Web browser on the computer.
3 Enter the following URL in the location or address field of your browser:
http://192.168.1.1 (Figure 9
). The Login screen displays.
Figure 9 Web Browser Location Field (Factory Default)
4 To log in as an administrator, enter the password (the default setting is
admin) in the System Password field and click Log in (Figure 10
).
Be sure to bookmark this screen for easy reference if you should want to
change the Gateway settings.