Owner's Manual

Activating Malicious Call Trace 41
To activate Do Not Disturb:
1 Open the Features tab, then scroll down the list of features and select
Do Not Disturb.
Your telephone is now in Do Not Disturb mode. The display panel shows
DND.
2 To disable Do Not Disturb mode, repeat step 1. The DND message
disappears from the display panel.
Activating
Malicious Call Trace
The Malicious Call Trace feature enables you to notify the system if you
receive a harassing or abusive call. The calling party can be from either an
external or internal source.
Malicious Call Trace cannot be invoked when you are on a conference
call.
To activate malicious call tracing during a call, press Feature + 119.
The Display Panel shows
malicious call for 5 seconds.
The results of tracing a malicious call include the following actions:
■ Notification is sent to your network manager.
■ The log for the call includes a malicious call identifier.
■ For external malicious calls, the VCX system sends a message to the
authorities configured by your administrator to receive these reports.
Once you use the Malicious Call Trace feature code during a call, you
cannot revoke it.