User Manual

4-Port Gigabit Ethernet Interface Module (GBIC) Quick Start Guide
3
WARNING: To ensure optical safety when installing Gigabit Ethernet
Interface Modules, comply with the following precaution:
Although the data communication lasers used in this product meet the
regulatory requirements for casual exposure to the eye, as with any
source of bright light, it is advised that you do not look into the light
source.
Laser Safety Information:
IEC 825 and EN60825, Class 1 Laser Device.
For connection only to Class 1 Laser Devices.
FDA Class 1 Laser Device
This product complies with U.S. Department of Health and Human
Services Rules 21 CFR Subchapter J applicable at date of manufacture.
ESD Safety Information
Electrostatic discharge (ESD) can damage components of the module.
ESD, which occurs when a Gigabit Ethernet Interface Module is
improperly handled, can cause complete or intermittent failures.
CAUTION: To prevent ESD-related damage:
■ Always wear an ESD wrist strap (not provided) when you handle a
Gigabit Ethernet Interface Module, ensuring that the strap makes
good skin contact and is properly grounded.
■ Keep the Gigabit Ethernet Interface Module in its antistatic bag until
you are ready to install it.
CLASS 1
LASER PRODUCT