User Manual

4-Port Gigabit Ethernet Interface Module (GBIC) Quick Start Guide

Each module has four ports on the front panel. Figure 1 shows the

location of the components on the front panel of the Gigabit Ethernet

Interface Module.

Figure 1

Front Panel of the 4-port Gigabit Ethernet Interface Module (

GBIC)

In the 7-slot chassis, you install the module horizontally with the LEDs at

the left. In the 8-slot chassis and 16-slot chassis, you install the module

vertically with the LEDs at the top.

Audience Description

This guide is intended for trained technical personnel only. Do not

attempt to install, remove, or replace a CoreBuilder 9000 Gigabit

Ethernet Interface Module if you have not had the proper training from

3Com. For training information in the United States and Canada, call

1-800-NET-3COM. For training information in other countries, visit the

3Com Web site:

http://www.3com.com

Safety Precautions

When you handle components in a CoreBuilder 9000 system, be sure

that you follow all safety precautions. To avoid electric shocks, burns, or

equipment damage, read and follow these warnings:

WARNING:

Allow only trained service personnel to install, remove, or

replace a Gigabit Ethernet Interface Module.

WARNING: Hazardous energy exists within the system. Use extreme

caution when you install, remove, or replace any module when the

system is on:

■ Never insert metal objects such as a screwdriver or a finger with

jewelry into open module slots.

■ Do not touch any connections within the chassis with your hands or

fingers.

3CB9LG4

MOD STAT

Ejector handle

Module Status LED

Port Status LEDs

GBIC ports

Model number