User Manual

20 CHAPTER 3: INSTALLING AND CONFIGURING IN WINDOWS
5 Click the General tab.
6 In the General window, select DynamicAccess Protocol and click Properties.
The DynamicAccess Protocol Properties window appears. Click the appropriate tab
to configure server features.
Creating a Group
1 Click the Load Balance/RSL tab.
2 In the Load Balance/RSL window, click Create Group.
3 In the Create Group dialog box, type a group name.
4 Set the load balancing:
To enable transmit load balancing—Check the Transmit Load Balance Enabled
box.
To enable bidirectional load balancing—Check both the
Transmit Load Balance Enabled box and the Receive Load Balance Enabled box.
Enter only the Host ID bytes required for a dedicated IP address.
For example:
See Specifying a Dedicated IP Address for more information on the dedicated IP
address.
To disable all load balancing—Clear the Receive Load Balance Enabled and the
Transmit Load Balance Enabled check boxes.
5 Click OK.
The name of the new NIC group appears in the Load Balancing/RSL Groups list
box.
Do not use the group IP address as the dedicated IP address.
Byte 1 Byte 2 Byte 3 Byte 4
Class A Network ID Host ID
24 1 253
Class B Network ID Host ID
2 253
Class C Network ID Host ID
253