Data Sheet

3
CO SWITCH 8800 FAMILY
8
SPECIFICATIONS (CONTINUED)
* Available in the 3Com Advanced Feature Software v3, at additional cost
¥
TACACS+ authentication and SNMP v3 and SSH v2 encryption features are available in the Basic Software with Encryption
and Advanced Feature Software versions only
§
Available in the 3Com Switch 8800 IPsec module, at additional cost
SECURITY
Network login with IEEE 802.1X user
authentication
Local authentication and RADIUS
authentication
TACACS+ (Terminal Access Controller
Access Control System Plus)
authentication
¥
Automatic assignment of VLAN based
on user/device authentication
Wirespeed packet filtering in hardware
Supports a maximum of 12K ACL rules
per system; 1K ACL rules per module
ACLs filter at Layers 2, 3 and 4:
physical port
source/destination MAC address
VLAN information
Ethernet type
Layer 3 protocol
source/destination IP address
DSCP
datagram type
IP Layer 4 protocol
IP Layer 4 ports
MD5 cipher-text authentication and
clear-text authentication for OSPF v2
and RIP v2 packets and SNMP v3 traffic
Protection against DoS (Denial of
Service) attacks which exploit
protocols including IP, ARP and
IEEE 802.1X/EAP
IEEE 802.1X user authentication on
switch Telnet sessions
Hierarchical management and password
protection for management interface
Encrypted management traffic using
SSH v2
¥
and SNMP v3
¥
Realtime hardware data encryption:
DES, 3DES, AES 256-bit encryption
§
NETWORK APPLICATION MODULES
Network Monitoring Module
Netflow network analysis; v5, 8 and 9
compatible data export
400 network monitoring stream
sessions, max.
Statistics based on, among others:
source and destination IP address
UDP and TCP port
protocol type
ICMP type
IP priority
TOS
DSCP
2 Gbps throughput, max.
Firewall Module
Stateful firewall, supports routing and
transparent modes
NAT (Network Address Translation)
2k rules for each ACL item, max.
15K max. Application Specific Packet
Filters (ASPFs)
128 secure VLANs, max.
8 Demilitarized Zones (DMZ), max.
Protects from attacks originating
outside (IP spoofing, smurf, fraggle,
WinNuke, SYN flood, etc.) and inside
(ARP and host cheats)
ICMP redirection, traceroute control
Net traffic real time analysis
Mail alarm for firewall events
Binary log file
2 Gbps throughput, max.
8 1000 Mbps SFP ports
3 10/100 Ethernet ports and AUX and
console ports for management
I
Psec Module
Fully integrated IPsec VPN
3DES, DES; AES 256-bit hardware
encryption
8,192 L2TP tunnels, max.
100 L2TP sessions, max.
1,024 GRE tunnels, max.
5,000 IPsec tunnels, max.
100 IPsec sessions, max.
512-bit hardware encryption, max.
2 Gbps throughput, max.
8 1000 Mbps SFP ports
3 10/100 Ethernet ports and AUX and
console ports for management
VPLS Module
Lassere Kompella LDP VPLS
Complies with IETF draft-ietf-
ppvpn-vpls-ldp (05)
H-VPLS
Q-in-Q
MPLS hierarchical VPLS PE
(U-PE, N-PE)
1K VPLS instances, max.
128K MAC addresses, max.
3.5 Gbps bandwidth, max.
MANAGEMENT
CLI (Command Line Interface)
configuration mode
Configuration via the console (control
console) port
Local/remote configuration via Telnet
Remote configuration via modem dial-up
System configuration with SNMP v1,
2 and 3*
Comprehensive statistics
Port mirroring (one-to-one and many-
to-one), supported across modules
RMON (Remote Monitoring) groups:
statistics, history, alarm and events
ACL/QoS and IP interface statistics
System log
Syslog
Detailed alarm/debug information
Hierarchical alarms
Alarm generation and filtering
Statistics
Ping and Traceroute
NQA (Network Quality Assurance)
NTP (Network Time Protocol)
Configuration file for backup and restore
System file transfer mechanisms:
Xmodem, FTP, TFTP
IGMP MIBs per RFC 2932
GRAPHICAL MANAGEMENT
3Com Enterprise Management Suite:
flexible, extensible management in
advanced enterprise IT environments
3Com Network Director:
comprehensive, turnkey network
management; includes 3Com Switch
Manager application for GUI-based
management of Switch 8800 systems
CONNECTIVITY
Mix and match technologies and
media types in available payload slots:
1-port 10GBASE-X (XENPAK) module
1-, 2- and 4-port 10GBASE-X (XFP)
modules
12-, 24- and 48-port 1000BASE-X (SFP)
modules
24- and 48-port 10/100/1000BASE-T
(RJ-45) modules
DIMENSIONS
Switch 8814
Height: 75.3 cm (29.6 in)
Width: 43.6 cm (17.2 in)
Depth: 48.0 cm (18.9 in)
Weight (fully loaded chassis): <120 kg
(265 lbs)
Switch 8810
Height: 61.9 cm (24.4 in)
Width: 43.6 cm (17.2 in)
Depth: 48.0 cm (18.9 in)
Weight (fully loaded chassis): <80 kg
(176 lbs)
Switch 8807
Height: 48.6 cm (19.1 in)
Width: 43.6 cm (17.2 in)
Depth: 48.0 cm (18.9 in)
Weight (fully loaded chassis): <65 kg
(143 lbs)
POWER SUPPLY
1,200 W AC Power Supply
Input voltage: 100-240 VAC auto-ranging
Operating frequency: 47-63 Hz
Max. current: 13.6 A at 110 VAC;
6.8 A at 200 VAC
Max. output power: 1,200 Watts
Max. input power: 1,500 Watts
2,000 W AC Power Supply
Input voltage: 100-140 or 200-240 VAC
auto-ranging
Operating frequency: 47-63 Hz
Max. current: 11.4 A at 110 VAC;
11.4 A at 200 VAC
Max. output power: 1,000 Watts at
110 V; 2,000 Watts at 220 V
Max. input power: 1,250 Watts at
110 V; 2,500 Watts at 220 V