Operation Manual

Using Feature Codes 99
for the entire system, some of these features may not be available to
you.
3Com Entry
Telephone
Some of the features that are listed in Table 7 are available by using Hook
Flash on a 3Com Entry Telephone like Hold, Transfer, and Conference.
See
“Hook Switch Features” in Chapter 2.
For all other NBX features, use the preprogrammed Feature button and
the feature codes listed in
Table 7.
Using Feature
Codes
Follow these steps to use NBX feature codes:
1 Pick up the handset.
2 Press the Feature button.
3 Dial the feature code and any additional values as specified in Table 7.
4 Hang up when your call is complete or you have activated the features
that you want.
Tab le 7 NBX Feature Codes
Feature Feature Code See
Account Codes F + 888 + account code + # + telephone
number
“Account (Billing) Codes” in Chapter 6
ACD, Hunt, and Calling
Groups
F + feature code for the group + group
password + #
“Automatic Call Distribution Groups,
Hunt Groups, and Calling Groups” in
Chapter 6
Automatic Callback F + 469 + hang up “Using Automatic Callback” in
Chapter 4
Call Forward All F + 465 “Forwarding Incoming Calls” in
Chapter 4
Call Forward Busy F + 467 “Forwarding Incoming Calls” in
Chapter 4
Call Forward No Answer F + 466 “Forwarding Incoming Calls” in
Chapter 4
Call Park — Park a Call F + 444 + one of the Call Park extensions
for your NBX system
“Call Park”in Chapter 6
Call Pickup — Directed F + 455 + the extension of the ringing
telephone
“Call Pickup” in Chapter 6
Call Pickup — Group F + 456 + call pickup group number “Call Pickup” in Chapter 6
Call Privacy — On/Off F + 428 “Call Privacy” in Chapter 6