User's Manual

1-4
Severity level Description Value
Notification Normal information that needs to be noticed 5
Informational Informational information to be recorded 6
Debugging Information generated during debugging 7
Note: A smaller value represents a higher severity level.
Return to Log management configuration task list
.
Setting Loghost
Select Device > Syslog from the navigation tree, and click the Loghost tab to enter the loghost
configuration page, as shown in Figure 1-3
.
Figure 1-3 Set loghost
Table 1-5
describes the loghost configuration item.
Table 1-5 Loghost configuration item
Item Description
Loghost IP
IP address of the loghost.
z You can specify up to four loghosts.
z You must input a valid IP address.
Return to Log management configuration task list
.