User's Manual

1-5
Task Remarks
Displaying RMON Event Logs
If you have configured the system to log an event after the event
is triggered when you configure the event group, the event is
recorded into the RMON log. You can perform this task to display
the details of the log table
Configuring a Statistics Entry
Select Device > RMON from the navigation tree to enter the page of the Statistics tab, as shown in
Figure 1-1
. Click Add to enter the page for adding a statistics entry, as shown in Figure 1-2.
Figure 1-1 Statistics entry
Figure 1-2 Add a statistics entry
Table 1-5
describes the items for configuring a statistics entry.
Table 1-5 Statistics entry configuration items
Item Description
Interface Name
Select the name of the interface on which the statistics entry is created.
Only one statistics entry can be created on one interface.
Owner Set the owner of the statistics entry.
Return to RMON statistics group configuration task list
.