User's Manual

23
Function
When you start using your set for the first time, you must select the language
which will be used for displaying menu and indicators.
Function
1. LANGUAGE
Press the Menu button.
Press the or button to select the Function.
The options available in the Function group are
displayed.
Press the or button to select the Language.
2. Auto Adjust (PC only)
Press the MENU button and then use or button to select the FUNCTION menu.
Press the button and then use or button to select Auto Adjust.
When Auto adjust has finished, OK will be shown on screen.
If the position of the image is still not correct, try Auto adjustment again.
Although the image is still not correct, your set is functioning properly but needs further
adjustment.
3. Osd Time-Out
Press the MENU button and then use or button to select the FUNCTION menu.
Press the button and then use or button to select Osd Time-Out.
The preset time out intervals :
10 -> 15 -> 20 -> 25 -> 30 -> 35 -> 40 -> 45 -> 50 -> 55 -> 60 (Minutes)
4. Sleep Timer
You can select a time period of between off and 240 minutes after which your set
automatically switches off.
Press the MENU button and then use or button to select the FUNCTION menu.
Press the button and then use or button to select Sleep Timer.
Select the number of minutes after which your set switch on by pressing the or
button repeatedly.
The preset time intervals :
Off -> 10 -> 20 -> 30 -> 60 -> 90 -> 120 -> 180 -> 240 (Minutes)
Language
Auto Adjust
Osd Time-Out
Sleep Timer
FUNCTION
: Move : Adjust : Exit
60 Sec
Time Off
English