User's Manual

19
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing requirements.
Changing the Picture Standard
Press the Menu button.
The main menu is displayed.
Press the or button to select the Picture.
The options available in the Picture group are
displayed.
Press the button to select sub-Menu button.
Press the or button to select the sub-Menu item.
Press the button to select to change the value.
1
2
3
4
5
1. PSM(TV / Video / S-Video / DVD)
Press the button to change the sub-item
Dynamic -> Cinema -> Custom -> Standard
If you make any changes to these settings, the picture standard is automatically switched to
Custom.
You can also recall a desired picture (Standard, Cinema, Custom, Dynamic)
with PSM button on the remote control. The Picture Standard, Cinema and Dynamic
are programmed for good picture reproduction at the factory, and cannot be changed.
Select the option (Contrast, Brightness, Color, Sharpness or Tint only) to be adjusted
by pressing the or button.
2. Color Tone
You can control the 6 kinds temperature of screen color.
Press the button to change the sub-item
Cool1 -> Cool2 -> Nomal -> Warm1 -> Warm2-> User
3. Brightness
Adjust screen brightness as bright or darkly. Press or , adjust the amount from 0 to 100.
4. Contrast
Adjust contrast gap between the object in screen and background as softly or strongly.
Press or , adjust the amount from 0 to 100.
5. Color
Adjust the density of color as mild or deep. Press or , adjust the amount from 0 to100.
6. Tint (not available for TV mode)
Adjust the shadow of color. Press or , adjust the amount from 0 to 100.
7. Sharpness
Adjust the outline of object in screen as clear or misty. Press or , adjust the amount from 0 to 100.
8. Phase(PC,DTV), Frequency(PC Only)
Press the or buttons to adjust the screen quality, vertical stripes may appear or the picture
may be blurry.
PSM
Color Tone
Brightness
Contrast
Color
Tint
Sharpness
Picture
Custom
50
50
50
50
50
: Move : Adjust : Exit