User's Manual

Once you have connected up your various audio and video

systems, you can view the different sources by selecting the

appropriate input.

1. Check that all the necessary connections have been made

2. Press the SOURCES(EXIT/ ) button of Front panel or

Source of Remote Control

The input sources are displayed in the picture.

3. There are also "Video, S-Video, DVD, DTV, DVI and PC"

one of which you can select to fit a input source.

Inserting the Batteries in the Remote Control

Inserting the Batteries in the Remote Control & Input sources

Viewing and Selecting an Input source from External sources

You must insert or replace the batteries in the remote control when you ;

Purchase your set

Find that the remote control is no longer

operating correctly

1. Remote the cover on the rear of the remote

control by pressing the symbol downwards

and then pulling firmly to remove it.

2. Install two AAA size batteries.

+ on the battery against + on the remote control

- on the battery against - on the remote control

3. Replace the cover by aligning it with the base of the

remote control and presssing it back into place.

* Do not mix battery types, (Ex), alkaline and manganese.

1.5V