User's Manual

3.2.4 Control of OSD menu while in use of VIDEO or TV Input
AUDIO SETUP
- Auto Volume
Use to put the different level of volumes as per broadcast stations in a similar level
1. Press [MENU], then OSD MENU appears.
2. Select "AUDIO SETUP"
using [UP/DOWN], then
press [MENU].
3. Select "Auto Volume"
using [UP/DOWN]
then press [MENU]
4. Adjust the On/Off of AUTO VOLUME
using [RIGHT/LEFT]
Press [EXIT]
to return to previous menu
- Control of Stereo/Mono/SAP
According to the signal transmitted by broadcast station, select among Stereo/Mono/SAP
(There is a possibility of noise or bad sound at the areas of receiving poor signals,
in that case, select "Mono")
1. Press [MENU], then OSD MENU appears.
2. Select "AUDIO SETUP"
using [UP/DOWN], then
press [MENU].
3. Select "Stereo/Mono/SAP"
using [UP/DOWN]
then press [MENU]