TFT LCD Display USER'S MANUAL
Warnings WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: To reduce the risk of electric shock do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insinuated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Contents Warnings 1. Supplied Accessories 2. Installation 2.1. Wall Installation 2.2. Desktop Installation 2.3. Installation Procedure 2.4. Installation Reference 3. Operation 3.1 OSD (On Screen Display) buttons on the casing 3.2 Use of OSD (On Screen Display) menu 3.2.1 Basic Instruction of OSD Menu 3.2.2 OSD basic form 3.2.3 Control of OSD menu at PC Input mode 3.2.4 Control of OSD menu while in use of VIDEO or TV Input 3.2.5. Using TELETEXT with Remote Control 4. Product Specification 5.
Supplied Accessories Make sure the following accessories are provided with product. Installation Install Options * You can install the unit on a wall or place it on a table-like surface. * To eliminate any risk of injury from the unit falling, it should be mounted securely. 1. Wall Installation Caution: Do not install the unit on a weak wall surface, like plaster etc. it is not needed any bracket or installation accessory with the exception of nails or screws. Distance of holes of back panel is 305mm, a.
3. Operation 3.1 OSD(On Screen Display) buttons on the casing You can basically control OSD menu with OSD buttons on front case, therefore you need to understand overall functions of OSD buttons prior to entering main contents. ** Front Buttons Power On/Off When power is on, the light is green(blue).
3.2 Use of OSD(On Screen Display) menu 3.2.1 Basic Instruction of OSD Menu - Order of OSD Menu If you want to adjust the displaying, please follow the following procedure. 1. Press the [MENU] button, then OSD Menu will appear on screen. 2. Press [UP/DOWN] button to make a curser move to the item you want to adjust 3. Press [MENU] button while an icon is selected. 4. Sub ITEM or adjusting Menu will appear. If Sub item shows up, repeat two or three times until you can see an adjusting Menu. 5.
- Select the Input Mode - Conversion of source inputs ; You can select one of source inputs using [MENU] button. Press [MENU] button, then the following menu will appear. 1. Press [UP/DOWN] and put the cursor on "SOURCE" then press [MENU] 2. In order to convert to TV input, move cursor to [Television], then press [RIGHT] button. 3.
3.2.2 OSD basic form Two kinds of OSD menu are serviced as OSD structure. One for TV input, and the other for other source inputs. (OSD for analog PC input) (OSD for other sauce inputs) At the beginning, the cursor is fixed at [PICTURE], and the present resolution of PC Monitor appears at the bottom. If you press [LEFT/RIGHT] with no menu selected, then volume will be adjusted Increase VOLUME with [RIGHT] Decrease VOLUME with [LEFT] Press [EXIT] button, then menu disappears.
3.2.3 Control of OSD menu at PC input mode Adjustment of PICTURE - Control of Brightness To adjust BRIGHTNESS, take the following procedure. 1. Press [MENU], then OSD MENU appears. Select "PICTURE", then press [MENU]. 2. Select "Brightness" using [UP]/[DOWN] then press [MENU] 3. Adjust the desired Brightness using [RIGHT]/[LEFT] 4.
- Control of SHARPNESS Use to control the distinction of display 1. Press [MENU], then OSD MENU appears. Select "PICTURE", then press [MENU]. 2. Select "Sharpness" using [UP]/[DOWN] then press [MENU] 3. Select the distinction you want by using [RIGHT]/[LEFT] button. lower number gets stronger distinction, higher number gets smoother distinction. - Control of COLOR Use to adjust the density of color. 1. Press [MENU], then OSD MENU appears. Select "PICTURE", then press [MENU]. 2.
3. Select "Red" using [UP]/[DOWN] then press [MENU] 4. Adjust the level with using [RIGHT]/[LEFT] 5. Press [EXIT] to move to previous MENU * To adjust the density of Green, Blue, take the same procedure as above. Control of the position of entire screen - Control of H-POSITION Use to move the position of entire screen. 1. Press [MENU], then OSD MENU appears. Select "SCREEN CONTROL", then press [MENU]. 2.
3. Adjust the level by using [RIGHT]/[LEFT] 4. Press [EXIT] to move to previous MENU - SCALING Function Controlling magnification of the screen. 1. Press [MENU], then OSD MENU appears. Select "SCREEN CONTROL", then press [MENU]. 2. Select "Scaling" using [UP]/[DOWN] then press [MENU] 3.
- ZOOM Function Use to zoom in/out on the screen. 1. Press [MENU], then OSD MENU appears. Select "SCREEN CONTROL", then press [MENU]. 2. Select "Zoom" using [UP]/[DOWN] then press [MENU] 3. Select the level with using [RIGHT]/[LEFT] - FREEZE FRAME Function Use to pause the favorite shot of pictures. 1. Press [MENU], then OSD MENU appears. Select "SCREEN CONTROL", then press [MENU]. 2. Select "Freeze Frame" using [UP]/[DOWN] then press [MENU] 3.
Control of MISCELLANY - SYSTEM RESET In case that user makes improper setting, it sets back to factory default 1. Press [MENU], then OSD MENU appears. 2. Select "MISCELLANY" using [UP]/[DOWN], then press [MENU]. 3. Select "System Reset" using [UP]/[DOWN], then press [MENU] 4. Select [RIGHT]/[LEFT], then factory-defaulting will start .
4. Select the time as you like by using [RIGHT]/[LEFT], You can set up the time 5 to 60 sec. in a multiple of 5 sec. - OSD TRANSPARENCY Function 1. Press [MENU], then OSD MENU appears. 2. Select "MISCELLANY" using [UP]/[DOWN], then press [MENU]. 3. Select "OSD Transparency" using [UP]/[DOWN], then press [MENU] 4. Select the level you like with using [RIGHT]/[LEFT], On : OSD Background gets more transparent. Off : OSD Background gets less transparent.
- Using PIP(Picture in Picture) This function will work on Video / S-Video / Television / Scart signals as inputs to sub-screen on main screen PC mode. When watching PIP, the main screen and the sub-screen menu have differences in the quality of screen color. * PiP Adjustment 1. Press [MENU], then OSD MENU appears. 2. Select "MISCELLANY" using [UP]/[DOWN] then press [MENU] 3. Select "PiP" using [UP]/[DOWN], then press [MENU] 4. Adjust the desired PiP Size, PiP Source, PiP Position using [UP]/[DOWN].
-Teletext Language 1. Press [MENU], then OSD MENU appears. 2. Select "MISCELLANY" using [UP]/[DOWN], the press [MENU]. 3. Select "Redetect language" using[UP/DOWN], the press [menu]. 4.
AUDIO SETUP - Control of BALANCE Use to adjust right or left balance of VOLUME. 1. Press [MENU], then OSD MENU appears. 2. Select "AUDIO SETUP" using [UP/DOWN], then press [MENU]. 3. Select "Balance" using [UP/DOWN] then press [MENU] 4. Adjust the balance of VOLUME using [RIGHT/LEFT] L : left speaker R : right speaker - Control of SURROUND 1. Press [MENU], then OSD MENU appears. 2. Select "AUDIO SETUP" using [UP/DOWN], then press [MENU]. 3.
4. Adjust the On/Off of Surround using [RIGHT/LEFT] - Control of EQUALIZER Use to adjust certain frequency to make it fit user's desire 1. Press [MENU], then OSD MENU appears. 2. Select "AUDIO SETUP" using [UP/DOWN], then press [MENU]. 3. Select "Equalizer" using [UP/DOWN] then press [MENU] 4. Adjust to adjust certain frequency using [UP/DOWN], then press [MENU] 5. Adjust the value using [RIGHT/LEFT] ** Follow the same procedure to control Equalizer 500Hz, 1.
- AUTO CONFIG Adjust position of display and picture quality automatically. 1. Press [MENU], then OSD MENU appears. 2. Select "AUTO CONFIG" using [UP/DOWN], then press [MENU]. 3. Select [RIGHT/LEFT], then Start "AUTO CONFIG".
3.2.4 Control of OSD menu while in use of VIDEO or TV Input AUDIO SETUP - Auto Volume Use to put the different level of volumes as per broadcast stations in a similar level 1. Press [MENU], then OSD MENU appears. 2. Select "AUDIO SETUP" using [UP/DOWN], then press [MENU]. 3. Select "Auto Volume" using [UP/DOWN] then press [MENU] 4.
4. Adjust according to channel programs using [RIGHT/LEFT] At Auto selection, sound system automatically adjusted - Control of SOUND SYSTEM Use to fit each country's stereo system. 1. Press [MENU], then OSD MENU appears. 2. Select "AUDIO SETUP" using [UP/DOWN], then press [MENU]. 3. Select "Sound System" using [UP/DOWN] then press [MENU] 4.
Control of TV SETUP - Adjusting AUTO SEARCH Automatically search and store currently broadcasting channels in memory. 1. Press [MENU], then OSD MENU appears. 2. Select "TV SETUP" using [UP/DOWN], then press [MENU]. 3. Select "Auto Search" using [UP/DOWN] then press [MENU] 4. Select "AUTO SEARCHING", by pressing [RIGHT/LEFT]. Press [EXIT], to return to previous menu 5. Automatically search/store channels in memory. While searching/storing continues, all buttons do not work 6.
- PROGRAM EDIT After completing Auto Searching, use to delete the undesired of stored channels or input your favorite channels manually. 1. Press [MENU], then OSD MENU appears. 2. Select "TV SETUP" using [UP/DOWN], then press [MENU]. 3. Select "Program Edit", using [UP/DOWN] then press [MENU] 4. Use [UP/DOWN] to move to the intended channel and pressing [RIGHT], then you can watch by that channel. Use [LEFT] to delete a channel To return previous menu, press [EXIT].
- FINE TUNE Use to make minute adjustment when unsecured, poor colored display or lined picture appears. 1. Press [MENU], then OSD MENU appears. 2. Select "TV SETUP" using [UP/DOWN], then press [MENU]. 3. Select "Fine Tune", using [UP/DOWN] then press [MENU] 4.
3.2.5 Using TELETEXT with a remote control - TELETEXT When the present TV program is broadcasted with text information, it shows TV mode and Text mode in a toggle form by Text button, recognizing its signal. * The remote control has not been fixed yet. This is subject to change without notice. DIGIT 0~ 9 buttons - In TE XT Mode, it is possible to move to the selected page directly UP/DOWN buttons - In TE XT Mode, page nbr shall be Up/Down.
R/G/Y/C C OLOR buttons - In TE XT Mode, there are four different colors at the bottom of the screen. One of them can be chosen with these buttons. C ANC E L button - In TE XT Mode, it is used to cancel the searching of pages or other working functions. INDE X button - In TE XT Mode, it is used to connect directly to the index page of text screen. Normally Page No. 100 is appointed as the index page. S IZE button - In TE XT Mode, it is used to enlarge the size of current page.
4. Product Spec. Specification LT27A02 MODEL Panel:TFT-LCD Panel Type Size Panel Pitch Maximum Color Brightness Contrast Ratio Viewing Angle Resolution Scanning Frequency: Horizontal Vertical Program Channels TV: Color System Tuner System OSD/Direct Control LVDS 27 inch 0.1555(H) x 0.4665(V) 16.7M(8bit) 550cd 600:1 85" WXGA(1280*720) @75Hz 30~80.0KHz 55~75Hz 99Programs(EU).
5. Troubleshooting Troubleshooting I n case a problem occurs wit h your L CD , please t ake t he f ollowing st eps f irst . I f you st ill have t he problem, t urn t he power of f and cont act your dealer or an aut horized service cent er. TROUBLESHOOTING The screen does not appear. Screen is too bright or too dark.
FCC Compliance Statements Not e: This equipment has been t est ed and f ound t o comply wit h t he limit s f or a Class B digit al device, pursuant t o part 15 of t he FCC Rules. These limit s are designed t o provide reasonable prot ect ion against harmf ul int erf erence in a resident ial inst allat ion.
