Owner manual

9-6 Appendix C. Specifications TCR Series User's Manual
GPI/O Connector Pinouts
Connector type: 15-pin D
54321
9 10 11 12
6 7 8
13 14 15
Female on Chassis
5 4 3 2 1
9101112
678
131415
Male on Cable
Pin # Signal Pin # Signal
1 Ground 9 In 1
2 N/C 10 In 2
3 N/C 11 In 3
4 N/C 12 N/C
5 In 4 13 Out 1
6 In 5 14 Out 2
7 In 6 15 Out 3
8 + 5V, 100 mA Max
Note: N/C = not connected
AC Power Connector Pinouts
The table below lists pinouts for the AC POWER connector.
Connector type: 3-Pin IEC Male, latching.
1 3 2 2 3 1
Female on Cable Male on Chassis
Pin # Function
1 Neutral/Line 2
2 Line
3 Ground
Note Latching works only with factory-supplied latching cord. Standard
non-latching IEC-320 cords will fit, but will not latch. If necessary,
replace the power cord only with Underwriters Laboratories Listed
cord of the same ratings.