Manual

Page 42 Instant Replay Owner's Manual
PREPARING TO BACKUP
STOP/CANCEL TO QUIT
Backup begins and the display shows the current file number and the percent completion for the
current file:
FILE 1 OF 193
00% BACKED UP
Backup will proceed until all files are backed up, and the display will show the total number of files.
If STOP or CANCEL is pressed during backup the display changes to:
QUIT BACKUP?
PRESS ENTER/CANCEL
Press CANCEL or STOP and the backup will continue. Press ENTER to stop backup. An ending
summary will be displayed.
Restore From Backup Procedure
The procedure for Restoring a Bank or Drive is the same. Instant Replay identifies the type of backup
automatically.
• From the file transfer menu select RESTORE FROM BACKUP and press Enter.
• The display changes to:
ARE YOU SURE?
PRESS ENTER/CANCEL
• Press Enter to continue, or Cancel to exit this operation.
• After pressing Enter the menu button begins to flash and the display shows:
START RESTORE DEVICE
STOP/CANCEL TO QUIT
• At this time start the DAT machine playing a backup tape through its AES/EBU digital
output, and press Enter. Alternately, press Cancel to exit from this operation.
• When backup data is received from the DAT player, the display changes to show the
current file number and the percent completion for the current file:
FILE 1 OF 193
00% RESTORED
Restore will proceed until all files are restored; the display will show the number of files successfully
restored. Files received with DAT tape errors are skipped.
If the STOP or CANCEL buttons are pressed, the operation continues but the display shows:
QUIT RESTORE?
PRESS ENTER/CANCEL
If you press ENTER the restore discontinues and an ending summary is displayed.
If you press CANCEL or STOP at the prompt to quit, the display reverts to updating the file number and
percentage complete and the restore operation continues.
• After the ending summary you are prompted to press Enter. The machine resets itself
and restarts as it does when power is first applied.