Manual

Instant Replay Owner's Manual Page 31
Machine Setup Menus” for further information.
The Printer port is also used to connect external storage devices such as an Iomega Zip drive that are
designed to be connected to a parallel port. See the chapter, “Using an External Drive” on page 32.
GPI/Play Remote Input
Instant Replay includes a General Purpose Interface (GPI) that duplicates the PLAY button. It is on a
1/8” mini phone jack on the back panel. Connect a momentary switch (console button, footswitch,
etc.) to the back panel jack marked GPI/PLAY. The Configuration Menu contains an item GPI
INPUT. To access it, press MENU, then use the SCROLL ARROW KEYS to select CONFIGURATION
and press ENTER again. Use the SCROLL ARROW KEYS to select GPI INPUT and be sure it is set to
ENABLE. If it is set to DISABLE, press ENTER, then the UP ARROW key and ENTER again. Press
MENU to return to normal operation.
When you activate the remote momentary switch, Instant Replay will behave as if you had pressed
PLAY. You can also initiate recording remotely by putting Instant Replay in Record Ready and
activating the remote switch.
Note that activating the remote switch will also cancel PAUSE if it is active. While Instant Replay is
Paused, pressing a Hot-Key displays the Assigned Cut’s title and statistics but does not play it. This
lets you check the Hot-Key assignment silently, and is most useful in a live broadcast or performance
application. For example, an engineer can find and cue up a Hot-Key Cut to be played, and on-air
talent can start playback with the remote switch.