Manual

Instant Replay Owner's Manual Page 15

Metering and Level Controls

Level Meters

The LEVEL METERS show the current record or playback level. The LEVEL METERS are not affected

by the setting of the rear panel OUTPUT ATTENUATOR switch.

Input Level Controls

The Left and Right INPUT LEVEL Controls set the levels for recording. Set the levels so that the

loudest part of your recording causes the first red segment of the meter to light. When turned all the

way down, no sound will pass.

Headphone Level Control

Sets the level of the HEADPHONE OUTPUT. This output is not affected by the OUTPUT ATTENUATOR

Switch.

AUDIO EDIT OPERATIONS

Beginning with software version 2.3, Instant Replay can accomplish audio editing such as head and

tail trim, and variable-length fade ins and fade outs. Any of these operations may be done to

previously recorded files, or immediately at the end of each new recording. There is a setting for

“Prompt for Head/Tail” in the RECORD SETUP MENU (pg. 22) which determines whether the

editing prompts are displayed automatically after each recording.

Edit After Recording

If “Prompt for Head/Tail” in the RECORD SETUP MENU is enabled, the following Head Trim

screen will be displayed at the end of each recording:

ENTER/ADJUST OR PLAY

HEAD 0.00

Followed by the Tail Trim screen:

ENTER/ADJUST OR PLAY

TAIL 3.00

General Editing

Any file previously recorded on Instant Replay may be edited with head and tail trims, variable-

length fades, and overall gain adjustment. To perform one of these operations, select the Cut to be

edited so that it’s title is displayed and press MENU. Next, select the EDITING sub-menu, then the

function you wish to apply.

Use the SCROLL ARROWS to change menu selections or change the adjustment value, and the RIGHT

AND LEFT ARROWS (Keys 48, 49) to move the cursor to the character position you wish to adjust.

No file may be edited to be shorter than 100ms (0.10 second).

Head Trim

Use the MENU, ENTER, and SCROLL keys to navigate to the Adjust Head Trim menu.

Menu | Editor | Adjust Head Point

ADJUST HEAD POINT

HEAD 03.00