Manual

Page 14 Instant Replay Owner's Manual
RECORDING OPERATIONS
Transport Control Buttons
The Transport Controls include STOP, PLAY and RECORD. They perform in the traditional manner of
tape recorders.
Stop
Immediately ends recording or playback. Stops some sequential operations, such as File Transfer and
Copy Bank.
Play
Starts playback of the currently selected Cut. Note that pressing PLAY initiates playback from the
beginning of the selected Cut, even if it is already playing. The exception is when PLAY is used to
disengage PAUSE.
Record
Places Instant Replay in Record Ready mode. (Instant Replay will allocate disk space, and then enter
record when the PLAY button is pressed.)
To Record A Cut
• Set THRESHOLD and turn off RECORD/ERASE LOCKOUT (Record Setup Menu).
• Set AUDIO INPUT to ANALOG or one of the DIGITAL INPUT SELECTIONS (in Record
Setup Menu).
• Press RECORD button. Set Input Level controls (for Analog Input only).
• Select an alternate Index Number, if desired, using SCROLL ARROWS.
• Press PLAY; machine will enter Record mode.
• When done, press STOP.
• Enter Cut Title using alphanumeric keys.
• Press ENTER to save the title.
T
T
T
I
I
I
P
P
P
:
:
:
If you wish to place a Cut in an Index Number that is far from the one supplied by default, just use the
number supplied. After recording, use the Move operation to reassign it to the desired Index Number.
Move allows direct entry of an Index number using numeric keys.
To Erase A Cut
Note that RECORD/ERASE LOCKOUT (in RECORD SETUP Menu) must be OFF.
• Select the Cut.
• Press the MENU button.
• Select OPERATIONS.
• Press ENTER.
• Select ERASE.
• Press ENTER.
• Press ENTER again to confirm.
• To erase additional Cuts, select another Cut using the CURSOR ARROW keys (HOT-KEYs
48 and 49) and press ENTER twice.
• When done, press MENU to exit.